- Home /
- DSKNL3225P12KC04
Details
DSKNL3225P12KC04
Additional Information
SKU | 2273145 |
---|---|
Manufacturer | Kennametal |
Tool Group | DSKN-KC 75 DEGREE |
Holder Style | DSKN |
Clamping Style | Kenclamp |
H - mm | 32.00 |
B - mm | 25.00 |
F - mm | 32.00 |
L1 - mm | 170.00 |
L2 - mm | 32.00 |
L1A - mm | 3.05 |
Gauge Insert | SN..120408 |
Insert Type | Negative |
Torx Plus | 15 IP |
Clamp Asssembly | CM234R ASSY |
Slotted Pin | SSP025016M |
Optional Lock Pin | KLM46L15IP |
Hand of Tool | L |
Related Products
Below are the related products for this ISO Toolholder.
CBN Inserts
SNGA - 2 products Negative CBN Insert for Medium Machining
Product Code | D | L10 | Rε | |
---|---|---|---|---|
SNGA120408S01225MT KBH20 | 12.70 | 12.70 | 0.80 | |
SNGA120412S01225MT KBH20 | 12.70 | 12.70 | 1.20 |
ISO Inserts
SNGG-FS - 1 products Negative ISO insert for Finishing machining.
Product Code | D | L10 | Rε | Type of Cut | Material Machining | |
---|---|---|---|---|---|---|
SNGG120408FS KCU10 | 12.70 | 12.70 | 0.80 | Finishing |
SNGP - 4 products Negative ISO insert for Finishing machining.
Product Code | D | L10 | Rε | S | D1 | Type of Cut | Material Machining | |
---|---|---|---|---|---|---|---|---|
SNGP120404 KC5410 | 12.70 | 12.70 | 0.40 | 4.76 | 5.16 | Finishing | ||
SNGP120404 KCU10 | 12.70 | 12.70 | 0.40 | 0.00 | 0.00 | Finishing | ||
SNGP120408 KC5410 | 12.70 | 12.70 | 0.80 | 4.76 | 5.16 | Finishing | ||
SNGP120408 KCU10 | 12.70 | 12.70 | 0.80 | 4.76 | 5.16 | Finishing |
SNMA - 12 products Negative ISO insert for Medium machining.
Product Code | D | L10 | Rε | S | D1 | Type of Cut | Material Machining | |
---|---|---|---|---|---|---|---|---|
SNMA120408 K68 | 12.70 | 12.70 | 0.80 | 4.76 | 5.16 | Medium | ||
SNMA120408 KCK05 | 12.70 | 12.70 | 0.80 | 4.76 | 5.16 | Medium | ||
SNMA120408 KCK15 | 12.70 | 12.70 | 0.80 | 4.76 | 5.16 | Medium | ||
SNMA120408 KCK20 | 12.70 | 12.70 | 0.80 | 4.76 | 5.16 | Medium | ||
SNMA120412 KCK05 | 12.70 | 12.70 | 1.20 | 4.76 | 5.16 | Medium | ||
SNMA120412 KCK15 | 12.70 | 12.70 | 1.20 | 4.76 | 5.16 | Medium | ||
SNMA120412 KCK20 | 12.70 | 12.70 | 1.20 | 4.76 | 5.16 | Medium | ||
SNMA120416 KCK05 | 12.70 | 12.70 | 1.60 | 4.76 | 5.16 | Medium | ||
SNMA120416 KCK15 | 12.70 | 12.70 | 1.60 | 4.76 | 5.16 | Medium | ||
SNMA120416 KCK20 | 12.70 | 12.70 | 1.60 | 4.76 | 5.16 | Medium | ||
SNMA120408 KCK15B | 12.70 | 12.70 | 0.80 | 4.76 | 5.16 | Medium | ||
SNMA120412 KCK15B | 12.70 | 12.70 | 1.20 | 4.76 | 5.16 | Medium |
SNMG - 2 products Negative ISO insert for Medium machining.
Product Code | D | L10 | Rε | S | D1 | Type of Cut | Material Machining | |
---|---|---|---|---|---|---|---|---|
SNMG120408 K68 | 12.70 | 12.70 | 0.80 | 4.76 | 5.16 | Medium | ||
SNMG120412 K68 | 12.70 | 12.70 | 1.20 | 4.76 | 5.16 | Medium |
SNMG-B - 1 products Negative ISO insert for Medium machining.
Product Code | D | L10 | Rε | S | D1 | Type of Cut | Material Machining | |
---|---|---|---|---|---|---|---|---|
SNMG120416B K68 | 12.70 | 12.70 | 1.60 | 4.76 | 5.16 | Medium |
SNMG-FF - 4 products Negative ISO insert for Finishing machining.
Product Code | D | L10 | Rε | S | D1 | Type of Cut | Material Machining | |
---|---|---|---|---|---|---|---|---|
SNMG120404FF KT315 | 12.70 | 12.70 | 0.40 | 4.76 | 5.16 | Finishing | ||
SNMG120404FF KCP10 | 12.70 | 12.70 | 0.40 | 4.76 | 5.16 | Finishing | ||
SNMG120408FF KCP10 | 12.70 | 12.70 | 0.80 | 4.76 | 5.16 | Finishing | ||
SNMG120408FF KT315 | 12.70 | 12.70 | 0.80 | 4.76 | 5.16 | Finishing |
SNMG-FN - 19 products Negative ISO insert for Finishing machining.
Product Code | D | L10 | Rε | S | D1 | Type of Cut | Material Machining | |
---|---|---|---|---|---|---|---|---|
SNMG120404FN KT315 | 12.70 | 12.70 | 0.40 | 4.76 | 5.16 | Finishing | ||
SNMG120408FN KT315 | 12.70 | 12.70 | 0.80 | 4.76 | 5.16 | Finishing | ||
SNMG120404FN KCK05 | 12.70 | 12.70 | 0.40 | 4.76 | 5.16 | Finishing | ||
SNMG120404FN KCP05 | 12.70 | 12.70 | 0.40 | 4.76 | 5.16 | Finishing | ||
SNMG120404FN KCP10 | 12.70 | 12.70 | 0.40 | 4.76 | 5.16 | Finishing | ||
SNMG120408FN KCK05 | 12.70 | 12.70 | 0.80 | 4.76 | 5.16 | Finishing | ||
SNMG120408FN KCP05 | 12.70 | 12.70 | 0.80 | 4.76 | 5.16 | Finishing | ||
SNMG120412FN KT315 | 12.70 | 12.70 | 1.20 | 4.76 | 5.16 | Finishing | ||
SNMG120408FN KCP10 | 12.70 | 12.70 | 0.80 | 4.76 | 5.16 | Finishing | ||
SNMG120408FN KCP25 | 12.70 | 12.70 | 0.80 | 4.76 | 5.16 | Finishing | ||
SNMG120412FN KCK05 | 12.70 | 12.70 | 1.20 | 4.76 | 5.16 | Finishing | ||
SNMG120412FN KCP10 | 12.70 | 12.70 | 1.20 | 4.76 | 5.16 | Finishing | ||
SNMG120412FN KCP25 | 12.70 | 12.70 | 1.20 | 4.76 | 5.16 | Finishing | ||
SNMG120416FN KCK05 | 12.70 | 12.70 | 1.60 | 4.76 | 5.16 | Finishing | ||
SNMG120416FN KCP10 | 12.70 | 12.70 | 1.60 | 4.76 | 5.16 | Finishing | ||
SNMG120404FN KCP10B | 12.70 | 12.70 | 0.40 | 4.76 | 5.16 | Finishing | ||
SNMG120408FN KCP10B | 12.70 | 12.70 | 0.80 | 4.76 | 5.16 | Finishing | ||
SNMG120408FN KCP25B | 12.70 | 12.70 | 0.80 | 4.76 | 5.16 | Finishing | ||
SNMG120412FN KCP10B | 12.70 | 12.70 | 1.20 | 4.76 | 5.16 | Finishing |
SNMG-MN - 19 products Negative ISO insert for Medium machining.
Product Code | D | L10 | Rε | S | D1 | Type of Cut | Material Machining | |
---|---|---|---|---|---|---|---|---|
SNMG120408MN KCP40 | 12.70 | 12.70 | 0.80 | 4.76 | 5.16 | Medium | ||
SNMG120412MN KCP40 | 12.70 | 12.70 | 1.20 | 4.76 | 5.16 | Medium | ||
SNMG120404MN KCP10 | 12.70 | 12.70 | 0.40 | 4.76 | 5.16 | Medium | ||
SNMG120404MN KCP25 | 12.70 | 12.70 | 0.40 | 4.76 | 5.16 | Medium | ||
SNMG120404MN KCP30 | 12.70 | 12.70 | 0.40 | 4.76 | 5.16 | Medium | ||
SNMG120408MN KCP10 | 12.70 | 12.70 | 0.80 | 4.76 | 5.16 | Medium | ||
SNMG120408MN KCP25 | 12.70 | 12.70 | 0.80 | 4.76 | 5.16 | Medium | ||
SNMG120408MN KCP30 | 12.70 | 12.70 | 0.80 | 4.76 | 5.16 | Medium | ||
SNMG120412MN KCP10 | 12.70 | 12.70 | 1.20 | 4.76 | 5.16 | Medium | ||
SNMG120412MN KCP25 | 12.70 | 12.70 | 1.20 | 4.76 | 5.16 | Medium | ||
SNMG120412MN KCP30 | 12.70 | 12.70 | 1.20 | 4.76 | 5.16 | Medium | ||
SNMG120416MN KCP10 | 12.70 | 12.70 | 1.60 | 4.76 | 5.16 | Medium | ||
SNMG120416MN KCP25 | 12.70 | 12.70 | 1.60 | 4.76 | 5.16 | Medium | ||
SNMG120404MN KCP25B | 12.70 | 12.70 | 0.40 | 4.76 | 5.16 | Medium | ||
SNMG120408MN KCP10B | 12.70 | 12.70 | 0.80 | 4.76 | 5.16 | Medium | ||
SNMG120408MN KCP25B | 12.70 | 12.70 | 0.80 | 4.76 | 5.16 | Medium | ||
SNMG120412MN KCP10B | 12.70 | 12.70 | 1.20 | 4.76 | 5.16 | Medium | ||
SNMG120412MN KCP25B | 12.70 | 12.70 | 1.20 | 4.76 | 5.16 | Medium | ||
SNMG120416MN KCP25B | 12.70 | 12.70 | 1.60 | 4.76 | 5.16 | Medium |
SNMG-RN - 16 products Negative ISO insert for Rough machining.
Product Code | D | L10 | Rε | S | D1 | Type of Cut | Material Machining | |
---|---|---|---|---|---|---|---|---|
SNMG120408RN KCP40 | 12.70 | 12.70 | 0.80 | 4.76 | 5.16 | Rough | ||
SNMG120412RN KCP40 | 12.70 | 12.70 | 1.20 | 4.76 | 5.16 | Rough | ||
SNMG120416RN KCP40 | 12.70 | 12.70 | 1.60 | 4.76 | 5.16 | Rough | ||
SNMG120408RN KCP10 | 12.70 | 12.70 | 0.80 | 4.76 | 5.16 | Rough | ||
SNMG120408RN KCP25 | 12.70 | 12.70 | 0.80 | 4.76 | 5.16 | Rough | ||
SNMG120408RN KCP30 | 12.70 | 12.70 | 0.80 | 4.76 | 5.16 | Rough | ||
SNMG120412RN KCP10 | 12.70 | 12.70 | 1.20 | 4.76 | 5.16 | Rough | ||
SNMG120412RN KCP25 | 12.70 | 12.70 | 1.20 | 4.76 | 5.16 | Rough | ||
SNMG120412RN KCP30 | 12.70 | 12.70 | 1.20 | 4.76 | 5.16 | Rough | ||
SNMG120416RN KCP10 | 12.70 | 12.70 | 1.60 | 4.76 | 5.16 | Rough | ||
SNMG120416RN KCP25 | 12.70 | 12.70 | 1.60 | 4.76 | 5.16 | Rough | ||
SNMG120416RN KCP30 | 12.70 | 12.70 | 1.60 | 4.76 | 5.16 | Rough | ||
SNMG120412RN KCP10B | 12.70 | 12.70 | 1.20 | 4.76 | 5.16 | Rough | ||
SNMG120412RN KCP25B | 12.70 | 12.70 | 1.20 | 4.76 | 5.16 | Rough | ||
SNMG120416RN KCP10B | 12.70 | 12.70 | 1.60 | 4.76 | 5.16 | Rough | ||
SNMG120416RN KCP25B | 12.70 | 12.70 | 1.60 | 4.76 | 5.16 | Rough |
SNMG-FP - 7 products Negative ISO insert for Finishing machining.
Product Code | D | L10 | Rε | S | D1 | Type of Cut | Material Machining | |
---|---|---|---|---|---|---|---|---|
SNMG120404FP KC5010 | 12.70 | 12.70 | 0.40 | 4.76 | 5.16 | Finishing | ||
SNMG120404FP KCM15 | 12.70 | 12.70 | 0.40 | 4.76 | 5.16 | Finishing | ||
SNMG120404FP KCU10 | 12.70 | 12.70 | 0.40 | 0.00 | 0.00 | Finishing | ||
SNMG120408FP KCM15 | 12.70 | 12.70 | 0.80 | 4.76 | 5.16 | Finishing | ||
SNMG120408FP KCU10 | 12.70 | 12.70 | 0.80 | 0.00 | 0.00 | Finishing | ||
SNMG120408FP KT315 | 12.70 | 12.70 | 0.80 | 4.76 | 5.16 | Finishing | ||
SNMG120412FP KCM15 | 12.70 | 12.70 | 1.20 | 4.76 | 5.16 | Finishing |
SNMG-RP - 27 products Negative ISO insert for Rough machining.
Product Code | D | L10 | Rε | S | D1 | Type of Cut | Material Machining | |
---|---|---|---|---|---|---|---|---|
SNMG120408RP KCP40 | 12.70 | 12.70 | 0.80 | 4.76 | 5.16 | Rough | ||
SNMG120412RP KCP40 | 12.70 | 12.70 | 1.20 | 4.76 | 5.16 | Rough | ||
SNMG120408RP KCK05 | 12.70 | 12.70 | 0.80 | 4.76 | 5.16 | Rough | ||
SNMG120408RP KCK15 | 12.70 | 12.70 | 0.80 | 4.76 | 5.16 | Rough | ||
SNMG120408RP KCK20 | 12.70 | 12.70 | 0.80 | 4.76 | 5.16 | Rough | ||
SNMG120408RP KCM15 | 12.70 | 12.70 | 0.80 | 4.76 | 5.16 | Rough | ||
SNMG120408RP KCM25 | 12.70 | 12.70 | 0.80 | 4.76 | 5.16 | Rough | ||
SNMG120408RP KCM35 | 12.70 | 12.70 | 0.80 | 4.76 | 5.16 | Rough | ||
SNMG120408RP KCP05 | 12.70 | 12.70 | 0.80 | 4.76 | 5.16 | Rough | ||
SNMG120408RP KCP10 | 12.70 | 12.70 | 0.80 | 4.76 | 5.16 | Rough | ||
SNMG120408RP KCP25 | 12.70 | 12.70 | 0.80 | 4.76 | 5.16 | Rough | ||
SNMG120408RP KCP30 | 12.70 | 12.70 | 0.80 | 4.76 | 5.16 | Rough | ||
SNMG120412RP KCK05 | 12.70 | 12.70 | 1.20 | 4.76 | 5.16 | Rough | ||
SNMG120412RP KCK15 | 12.70 | 12.70 | 1.20 | 4.76 | 5.16 | Rough | ||
SNMG120412RP KCK20 | 12.70 | 12.70 | 1.20 | 4.76 | 5.16 | Rough | ||
SNMG120412RP KCM15 | 12.70 | 12.70 | 1.20 | 4.76 | 5.16 | Rough | ||
SNMG120412RP KCM25 | 12.70 | 12.70 | 1.20 | 4.76 | 5.16 | Rough | ||
SNMG120412RP KCM35 | 12.70 | 12.70 | 1.20 | 4.76 | 5.16 | Rough | ||
SNMG120412RP KCP05 | 12.70 | 12.70 | 1.20 | 4.76 | 5.16 | Rough | ||
SNMG120412RP KCP10 | 12.70 | 12.70 | 1.20 | 4.76 | 5.16 | Rough | ||
SNMG120412RP KCP25 | 12.70 | 12.70 | 1.20 | 4.76 | 5.16 | Rough | ||
SNMG120412RP KCP30 | 12.70 | 12.70 | 1.20 | 4.76 | 5.16 | Rough | ||
SNMG120416RP KCK20 | 12.70 | 12.70 | 1.60 | 4.76 | 5.16 | Rough | ||
SNMG120416RP KCP10 | 12.70 | 12.70 | 1.60 | 4.76 | 5.16 | Rough | ||
SNMG120412RP KCK15B | 12.70 | 12.70 | 1.20 | 4.76 | 5.16 | Rough | ||
SNMG120412RP KCP10B | 12.70 | 12.70 | 1.20 | 4.76 | 5.16 | Rough | ||
SNMG120412RP KCP25B | 12.70 | 12.70 | 1.20 | 4.76 | 5.16 | Rough |
SNMM-RP - 6 products Negative ISO insert for Rough Single Sided machining.
Product Code | D | L10 | Rε | S | D1 | Type of Cut | Material Machining | |
---|---|---|---|---|---|---|---|---|
SNMM120408RP KCP40 | 12.70 | 12.70 | 0.80 | 4.76 | 5.16 | Rough Single Sided | ||
SNMM120412RP KCP40 | 12.70 | 12.70 | 1.20 | 4.76 | 5.16 | Rough Single Sided | ||
SNMM120408RP KCP25 | 12.70 | 12.70 | 0.80 | 4.76 | 5.16 | Rough Single Sided | ||
SNMM120412RP KCP25 | 12.70 | 12.70 | 1.20 | 4.76 | 5.16 | Rough Single Sided | ||
SNMM120408RP KCM25 | 12.70 | 12.70 | 0.80 | 4.76 | 5.16 | Rough Single Sided | ||
SNMM120412RP KCM25 | 12.70 | 12.70 | 1.20 | 4.76 | 5.16 | Rough Single Sided |
SNMG-MP - 10 products Negative ISO insert for Medium machining.
Product Code | D | L10 | Rε | S | D1 | Type of Cut | Material Machining | |
---|---|---|---|---|---|---|---|---|
SNMG120412MP KCU10 | 12.70 | 12.70 | 1.20 | 0.00 | 0.00 | Medium | ||
SNMG120408MP KCM15 | 12.70 | 12.70 | 0.80 | 4.76 | 5.16 | Medium | ||
SNMG120408MP KCM25 | 12.70 | 12.70 | 0.80 | 4.76 | 5.16 | Medium | ||
SNMG120408MP KCM35 | 12.70 | 12.70 | 0.80 | 4.76 | 5.16 | Medium | ||
SNMG120408MP KCU10 | 12.70 | 12.70 | 0.80 | 0.00 | 0.00 | Medium | ||
SNMG120412MP KCM15 | 12.70 | 12.70 | 1.20 | 4.76 | 5.16 | Medium | ||
SNMG120412MP KCM25 | 12.70 | 12.70 | 1.20 | 4.76 | 5.16 | Medium | ||
SNMG120412MP KCM35 | 12.70 | 12.70 | 1.20 | 4.76 | 5.16 | Medium | ||
SNMG120416MP KCM25 | 12.70 | 12.70 | 1.60 | 4.76 | 5.16 | Medium | ||
SNMG120416MP KCM35 | 12.70 | 12.70 | 1.60 | 4.76 | 5.16 | Medium |
SNMG-FW - 6 products Negative ISO insert for Wiper Finishing machining.
Product Code | D | L10 | Rε | S | D1 | Type of Cut | Material Machining | |
---|---|---|---|---|---|---|---|---|
SNMG120408FW KCP05 | 12.70 | 12.70 | 0.80 | 4.76 | 5.16 | Wiper Finishing | ||
SNMG120408FW KCP10 | 12.70 | 12.70 | 0.80 | 4.76 | 5.16 | Wiper Finishing | ||
SNMG120408FW KT315 | 12.70 | 12.70 | 0.80 | 4.76 | 5.16 | Wiper Finishing | ||
SNMG120412FW KCP05 | 12.70 | 12.70 | 1.20 | 4.76 | 5.16 | Wiper Finishing | ||
SNMG120412FW KCP10 | 12.70 | 12.70 | 1.20 | 4.76 | 5.16 | Wiper Finishing | ||
SNMG120412FW KT315 | 12.70 | 12.70 | 1.20 | 4.76 | 5.16 | Wiper Finishing |
SNMS - 3 products Negative ISO insert for Medium Roughing machining.
Product Code | D | L10 | Rε | S | D1 | Type of Cut | Material Machining | |
---|---|---|---|---|---|---|---|---|
SNMS120408 K68 | 12.70 | 12.70 | 0.80 | 4.76 | 5.16 | Medium Roughing | ||
SNMS120408 KC5410 | 12.70 | 12.70 | 0.80 | 4.76 | 5.16 | Medium Roughing | ||
SNMS120412 KC5410 | 12.70 | 12.70 | 1.20 | 4.76 | 5.16 | Medium Roughing |
SNMG-MS - 6 products Negative ISO insert for Medium machining.
Product Code | D | L10 | Rε | S | D1 | Type of Cut | Material Machining | |
---|---|---|---|---|---|---|---|---|
SNMG120408MS K313 | 12.70 | 12.70 | 0.80 | 4.76 | 5.16 | Medium | ||
SNMG120408MS KCU10 | 12.70 | 12.70 | 0.80 | 0.00 | 0.00 | Medium | ||
SNMG120408MS KCU25 | 12.70 | 12.70 | 0.80 | 4.76 | 5.16 | Medium | ||
SNMG120412MS KC5525 | 12.70 | 12.70 | 1.20 | 4.76 | 5.16 | Medium | ||
SNMG120412MS KCU10 | 12.70 | 12.70 | 1.20 | 0.00 | 0.00 | Medium | ||
SNMG120412MS KCU25 | 12.70 | 12.70 | 1.20 | 4.76 | 5.16 | Medium |
SNMG-MW - 5 products Negative ISO insert for Wiper Medium machining.
Product Code | D | L10 | Rε | S | D1 | Type of Cut | Material Machining | |
---|---|---|---|---|---|---|---|---|
SNMG120408MW KCP10 | 12.70 | 12.70 | 0.80 | 4.76 | 5.16 | Wiper Medium | ||
SNMG120408MW KCP25 | 12.70 | 12.70 | 0.80 | 4.76 | 5.16 | Wiper Medium | ||
SNMG120412MW KCP10 | 12.70 | 12.70 | 1.20 | 4.76 | 5.16 | Wiper Medium | ||
SNMG120412MW KCP25 | 12.70 | 12.70 | 1.20 | 4.76 | 5.16 | Wiper Medium | ||
SNMG120412MW KCP25B | 12.70 | 12.70 | 1.20 | 4.76 | 5.16 | Wiper Medium |
SNMG-UN - 11 products Negative ISO insert for Rough machining.
Product Code | D | L10 | Rε | S | D1 | Type of Cut | Material Machining | |
---|---|---|---|---|---|---|---|---|
SNMG120408UN KCK05 | 12.70 | 12.70 | 0.80 | 4.76 | 5.16 | Rough | ||
SNMG120408UN KCK15 | 12.70 | 12.70 | 0.80 | 4.76 | 5.16 | Rough | ||
SNMG120408UN KCK20 | 12.70 | 12.70 | 0.80 | 4.76 | 5.16 | Rough | ||
SNMG120412UN KCK05 | 12.70 | 12.70 | 1.20 | 4.76 | 5.16 | Rough | ||
SNMG120412UN KCK15 | 12.70 | 12.70 | 1.20 | 4.76 | 5.16 | Rough | ||
SNMG120412UN KCK20 | 12.70 | 12.70 | 1.20 | 4.76 | 5.16 | Rough | ||
SNMG120416UN KCK05 | 12.70 | 12.70 | 1.60 | 4.76 | 5.16 | Rough | ||
SNMG120416UN KCK15 | 12.70 | 12.70 | 1.60 | 4.76 | 5.16 | Rough | ||
SNMG120416UN KCK20 | 12.70 | 12.70 | 1.60 | 4.76 | 5.16 | Rough | ||
SNMG120408UN KCK15B | 12.70 | 12.70 | 0.80 | 4.76 | 5.16 | Rough | ||
SNMG120412UN KCK15B | 12.70 | 12.70 | 1.20 | 4.76 | 5.16 | Rough |
SNMG-UP - 9 products Negative ISO insert for Rough machining.
Product Code | D | L10 | Rε | S | D1 | Type of Cut | Material Machining | |
---|---|---|---|---|---|---|---|---|
SNMG120408UP KCM15 | 12.70 | 12.70 | 0.80 | 4.76 | 5.16 | Rough | ||
SNMG120408UP KCM25 | 12.70 | 12.70 | 0.80 | 4.76 | 5.16 | Rough | ||
SNMG120408UP KCM35 | 12.70 | 12.70 | 0.80 | 4.76 | 5.16 | Rough | ||
SNMG120412UP KCM15 | 12.70 | 12.70 | 1.20 | 4.76 | 5.16 | Rough | ||
SNMG120412UP KCM25 | 12.70 | 12.70 | 1.20 | 4.76 | 5.16 | Rough | ||
SNMG120412UP KCM35 | 12.70 | 12.70 | 1.20 | 4.76 | 5.16 | Rough | ||
SNMG120416UP KCM15 | 12.70 | 12.70 | 1.60 | 4.76 | 5.16 | Rough | ||
SNMG120416UP KCM25 | 12.70 | 12.70 | 1.60 | 4.76 | 5.16 | Rough | ||
SNMG120416UP KCM35 | 12.70 | 12.70 | 1.60 | 4.76 | 5.16 | Rough |
SNMM-RM - 5 products Negative ISO insert for Rough Single Sided machining.
Product Code | D | L10 | Rε | S | D1 | Type of Cut | Material Machining | |
---|---|---|---|---|---|---|---|---|
SNMM120408RM KCP25 | 12.70 | 12.70 | 0.80 | 4.76 | 5.16 | Rough Single Sided | ||
SNMM120408RM KCP30 | 12.70 | 12.70 | 0.80 | 4.76 | 5.16 | Rough Single Sided | ||
SNMM120412RM KCP25 | 12.70 | 12.70 | 1.20 | 4.76 | 5.16 | Rough Single Sided | ||
SNMM120416RM KCP25 | 12.70 | 12.70 | 1.60 | 4.76 | 5.16 | Rough Single Sided | ||
SNMM120416RM KCP30 | 12.70 | 12.70 | 1.60 | 4.76 | 5.16 | Rough Single Sided |
ISO Select Inserts
SNMA - 2 products Negative ISO Select Inserts for General Purpose machining.
Product Code | D | L10 | Rε | S | D1 | Type of Cut | Material Machining | |
---|---|---|---|---|---|---|---|---|
SNMA120408 K20K | 12.70 | 12.70 | 0.80 | 0.00 | 0.00 | Rough | ||
SNMA120412 K20K | 12.70 | 12.70 | 1.20 | 0.00 | 0.00 | Rough |
SNMG-F - 6 products Negative ISO Select Inserts for General purpose machining.
Product Code | D | L10 | Rε | Type of Cut | Material Machining | |
---|---|---|---|---|---|---|
SNMG120408F K10M | 12.70 | 12.70 | 0.80 | Finishing | ||
SNMG120408F K10P | 12.70 | 12.70 | 0.80 | Finishing | ||
SNMG120408F K10U | 12.70 | 12.70 | 0.80 | Finishing | ||
SNMG120408F K15U | 12.70 | 12.70 | 0.80 | Finishing | ||
SNMG120408F K20K | 12.70 | 12.70 | 0.80 | Finishing | ||
SNMG120408F K25P | 12.70 | 12.70 | 0.80 | Finishing |
SNMG-H - 11 products Negative ISO Select Inserts for Tough grade, interruped cut machining.
Product Code | D | L10 | Rε | Type of Cut | Material Machining | |
---|---|---|---|---|---|---|
SNMG120408H K10P | 12.70 | 12.70 | 0.80 | Rough | ||
SNMG120408H K20K | 12.70 | 12.70 | 0.80 | Rough | ||
SNMG120408H K25P | 12.70 | 12.70 | 0.80 | Rough | ||
SNMG120412H K10P | 12.70 | 12.70 | 1.20 | Rough | ||
SNMG120412H K20K | 12.70 | 12.70 | 1.20 | Rough | ||
SNMG120412H K25P | 12.70 | 12.70 | 1.20 | Rough | ||
SNMG120412H K35P | 12.70 | 12.70 | 1.20 | Rough | ||
SNMG120416H K10P | 12.70 | 12.70 | 1.60 | Rough | ||
SNMG120416H K20K | 12.70 | 12.70 | 1.60 | Rough | ||
SNMG120416H K25P | 12.70 | 12.70 | 1.60 | Rough | ||
SNMG120416H K35P | 12.70 | 12.70 | 1.60 | Rough |
SNMG-M - 4 products Negative ISO Select Inserts for General purpose machining.
Product Code | D | L10 | Rε | Type of Cut | Material Machining | |
---|---|---|---|---|---|---|
SNMG120408M K10M | 12.70 | 12.70 | 0.80 | Medium | ||
SNMG120408M K25M | 12.70 | 12.70 | 0.80 | Medium | ||
SNMG120412M K10M | 12.70 | 12.70 | 1.20 | Medium | ||
SNMG120412M K25M | 12.70 | 12.70 | 1.20 | Medium |
SNMG-R - 14 products Negative ISO Select Inserts for Tough grade, interruped cut machining.
Product Code | D | L10 | Rε | Type of Cut | Material Machining | |
---|---|---|---|---|---|---|
SNMG120404R K10M | 12.70 | 12.70 | 0.40 | Rough | ||
SNMG120404R K10P | 12.70 | 12.70 | 0.40 | Rough | ||
SNMG120404R K25M | 12.70 | 12.70 | 0.40 | Rough | ||
SNMG120404R K25P | 12.70 | 12.70 | 0.40 | Rough | ||
SNMG120408R K10M | 12.70 | 12.70 | 0.80 | Rough | ||
SNMG120408R K10P | 12.70 | 12.70 | 0.80 | Rough | ||
SNMG120408R K25M | 12.70 | 12.70 | 0.80 | Rough | ||
SNMG120408R K25P | 12.70 | 12.70 | 0.80 | Rough | ||
SNMG120408R K35P | 12.70 | 12.70 | 0.80 | Rough | ||
SNMG120412R K10M | 12.70 | 12.70 | 1.20 | Rough | ||
SNMG120412R K10P | 12.70 | 12.70 | 1.20 | Rough | ||
SNMG120412R K25M | 12.70 | 12.70 | 1.20 | Rough | ||
SNMG120412R K25P | 12.70 | 12.70 | 1.20 | Rough | ||
SNMG120412R K35P | 12.70 | 12.70 | 1.20 | Rough |
Tick the related products you wish to purchase and add to cart with this ISO Toolholder.
Recently Viewed Products
Compare Products
You have no items to compare.
My Cart
You have no items in your shopping cart.