- Home /
- KDMT1210SRHF KC515M
Details
KDMT1210SRHF KC515M
Additional Information
SKU | 3965917 |
---|---|
Manufacturer | Kennametal |
Tool Group | KDMT-HF |
LI - mm | 14.00 |
W - mm | 12.00 |
S - mm | 2.50 |
RR - mm | 1.00 |
HM - mm | 0.08 |
Machining Operation | High Feed Machining |
Material Machining | Hardened |
Related Products
Below are the related products for this KDMT Die & Mold Insert.
KDMT Die & Mold Toolholders
Screw-On End Mills - 1 products
Product Code | D1 | D | DPM | G3X | L2 | Ap1 max | Z | Z U | Max Ramp Angle° | Max RPM | |
---|---|---|---|---|---|---|---|---|---|---|---|
KDMT12R028M08SN | 12.00 | 13.00 | 8.50 | M8 | 28.00 | 3.00 | 1 | 2 | 3.00 | 40,000 |
Necked End Mills, Cylindrical Shank, Steel - 2 products
Product Code | D1 | D | D3 | L | L2 | Ap1 max | Z | Z U | Max Ramp Angle° | Max RPM | |
---|---|---|---|---|---|---|---|---|---|---|---|
KDMT12R130A12SN | 12.00 | 12.00 | 10.50 | 132.00 | 34.00 | 3.00 | 1 | 2 | 3.00 | 40,000 | |
KDMT12R150A12SN | 12.00 | 12.00 | 10.50 | 152.00 | 48.00 | 3.00 | 1 | 2 | 3.00 | 40,000 |
Necked End Mills, Carbide Shank with Through Coolant - 4 products
Product Code | D1 | D | D3 | L | L2 | Ap1 max | Z | Z U | Max Ramp Angle° | Max RPM | |
---|---|---|---|---|---|---|---|---|---|---|---|
KDMT10R120A10HNC | 10.00 | 10.00 | 9.00 | 122.00 | 37.00 | 2.50 | 1 | 2 | 3.00 | 40,000 | |
KDMT10R150A10HNC | 10.00 | 10.00 | 9.00 | 152.00 | 52.00 | 2.50 | 1 | 2 | 3.00 | 40,000 | |
KDMT12R120A12HNC | 12.00 | 12.00 | 11.00 | 122.00 | 37.00 | 3.00 | 1 | 2 | 3.00 | 40,000 | |
KDMT12R160A12HNC | 12.00 | 12.00 | 11.00 | 162.00 | 52.00 | 3.00 | 1 | 2 | 3.00 | 40,000 |
Tick the related products you wish to purchase and add to cart with this KDMT Die & Mold Insert.
Recently Viewed Products
Compare Products
You have no items to compare.
My Cart
You have no items in your shopping cart.