GBP
  • GBP
  • EUR
  • USD
Exc. VAT
  • Exc. VAT
  • Inc. VAT
Worldwide Shipping

ISO Beyond Inserts

View Cutting Data &
Chipbreaker Geometry »

Inserts for Every Turning Operation

Kennametal, the trusted innovator in metalcutting technology, offers a complete range of indexable inserts for general turning operations. From roughing to finishing, Kennametal has the correct insert.

Plus, Kennametal offers the next generation in tooling with Beyond™. Harnessing advanced science and exceptional experience, our Beyond inserts deliver unparalleled levels of productivity, efficiency, dependability, and profitability.

Features and Benefits

Up to 30% Higher Productivity and Profitability

  • Achieve higher metal removal rates
    (speed, feed, and depth of cut).
  • Gain longer tool life.

Reliability

  • Deliver uniform wear for predictable tool life.
  • Achieve reduced depth-of-cut notching.
  • Virtually eliminate chip flow damage.

Versatility

  • Products can be applied across a wide range of applications.
  • Can be used in low- to high-speed applications.

Complete Portfolio

  • The Beyond product portfolio can be used in a complete range of steel, cast iron, and stainless steel ISO turning workpieces.

149 Item(s)

per page

Set Ascending Direction

  1. WNMG-FP

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    WNMG080412FP KC5010 » 12.70 8.69 1.20 4.76 5.16
    WNMG080408FP KCU10 » 12.70 8.69 0.80 - -
    WNMG080408FP KC5010 » 12.70 8.69 0.80 4.76 5.16
    WNMG080404FP KCU10 » 12.70 8.69 0.40 - -
    WNMG080404FP KC5010 » 12.70 8.69 0.40 4.76 5.16
    WNMG060408FP KCU10 » 9.53 6.52 0.80 - -
    WNMG060408FP KC5010 » 9.53 6.52 0.80 4.76 3.81
    WNMG060404FP KCU10 » 9.53 6.52 0.40 - -
    WNMG060404FP KC5010 » 9.53 6.52 0.40 4.76 3.81
    WNMG-FP

  2. WNMG-FF

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    WNMG080408FF KCU10 » 12.70 8.69 0.80 - -
    WNMG080408FF KC5010 » 12.70 8.69 0.80 4.76 5.16
    WNMG080404FF KCU10 » 12.70 8.69 0.40 - -
    WNMG080404FF KC5010 » 12.70 8.69 0.40 4.76 5.16
    WNMG060408FF KCU10 » 9.53 6.52 0.80 - -
    WNMG060408FF KC5010 » 9.53 6.52 0.80 4.76 3.81
    WNMG060404FF KCU10 » 9.53 6.52 0.40 - -
    WNMG060404FF KC5010 » 9.53 6.52 0.40 4.76 3.81
    WNMG-FF

  3. WNGG-LF

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    WNGG080408LF KCU10 » 12.70 8.69 0.80 - -
    WNGG080408LF KC5010 » 12.70 8.69 0.80 4.76 5.16
    WNGG080404LF KCU10 » 12.70 8.69 0.40 - -
    WNGG080404LF KC5010 » 12.70 8.69 0.40 4.76 5.16
    WNGG080402LF KCU10 » 12.70 8.69 0.20 - -
    WNGG080402LF KC5010 » 12.70 8.69 0.20 4.76 5.16
    WNGG080401LF KCU10 » 12.70 8.69 0.10 - -
    WNGG080401LF KC5010 » 12.70 8.69 0.10 4.76 5.16
    WNGG-LF

  4. VNMG-FP

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε  
    VNMG160408FP KCU10 » 9.53 16.61 0.80
    VNMG160404FP KCU10 » 9.53 16.61 0.40
    VNMG-FP

  5. VNMG-FF

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε  
    VNMG160408FF KCU10 » 9.53 16.61 0.80
    VNMG160404FF KCU10 » 9.53 16.61 0.40
    VNMG-FF

  6. VNGP

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε  
    VNGP220408 KCU10 » 12.70 22.14 0.80
    VNGP220404 KCU10 » - - -
    VNGP160402 KCU10 » 9.53 16.61 0.20
    VNGP160401 KCU10 » 9.53 16.61 0.10
    VNGP

  7. VNGG-LF

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    VNGG220408LF KCU10 » 12.70 22.14 0.80 - -
    VNGG220408LF KC5010 » 12.70 22.14 0.80 4.76 5.16
    VNGG160408LF KCU10 » 9.53 16.61 0.80 - -
    VNGG160408LF KC5010 » 9.53 16.61 0.80 4.76 3.81
    VNGG160404LF KCU10 » 9.53 16.61 0.40 - -
    VNGG160404LF KC5010 » 9.53 16.61 0.40 4.76 3.81
    VNGG160402LF KCU10 » 9.53 16.61 0.20 - -
    VNGG160402LF KC5010 » 9.53 16.61 0.20 4.76 3.81
    VNGG-LF

  8. VNGG-FS

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    VNGG160408FS KCU25 » 9.53 16.61 0.80 4.76 3.81
    VNGG160404FS KCU25 » 9.53 16.61 0.40 4.76 3.81
    VNGG160402FS KCU25 » 9.53 16.61 0.20 4.76 3.81
    VNGG160401FS KCU25 » 9.53 16.61 0.10 4.76 3.81
    VNGG-FS

  9. TNMG-FP

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    TNMG220408FP KC5010 » 12.70 22.00 0.80 4.76 5.16
    TNMG220404FP KC5010 » 12.70 22.00 0.40 4.76 5.16
    TNMG160408FP KC5010 » 9.53 16.50 0.80 4.76 3.81
    TNMG160404FP KC5010 » 9.53 16.50 0.40 4.76 3.81
    TNMG-FP

  10. TNMG-FF

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    TNMG160408FF KCU10 » 9.53 16.50 0.80 - -
    TNMG160408FF KC5010 » 9.53 16.50 0.80 4.76 3.81
    TNMG160404FF KCU10 » 9.53 16.50 0.40 - -
    TNMG160404FF KC5010 » 9.53 16.50 0.40 4.76 3.81
    TNMG110308FF KC5010 » 6.35 11.00 0.80 3.18 2.26
    TNMG110304FF KCU10 » 6.35 11.00 0.40 - -
    TNMG110304FF KC5010 » 6.35 11.00 0.40 3.18 2.26
    TNMG-FF

  11. TNGP

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε  
    TNGP160408 KCU10 » 9.53 16.50 0.80
    TNGP160404 KCU10 » 9.53 16.50 0.40
    TNGP

  12. TNGG-FS

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    TNGG220408FS KCU25 » 12.70 22.00 0.80 4.76 5.16
    TNGG220408FS KCU10 » 12.70 22.00 0.80 - -
    TNGG160408FS KCU25 » 9.53 16.50 0.80 4.76 3.81
    TNGG160404FS KCU25 » 9.53 16.50 0.40 4.76 3.81
    TNGG160404FS KCU10 » 9.53 16.50 0.40 - -
    TNGG160402FS KCU25 » 9.53 16.50 0.20 4.76 3.81
    TNGG-FS

  13. SNMG-FP

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    SNMG120408FP KCU10 » 12.70 12.70 0.80 - -
    SNMG120404FP KCU10 » 12.70 12.70 0.40 - -
    SNMG120404FP KC5010 » 12.70 12.70 0.40 4.76 5.16
    SNMG-FP

  14. SNGP

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    SNGP120408 KCU10 » 12.70 12.70 0.80 4.76 5.16
    SNGP120404 KCU10 » 12.70 12.70 0.40 - -
    SNGP

  15. SNGG-LF

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    SNGG150612LF KCU10 » 15.88 15.88 1.20 - -
    SNGG150612LF KC5010 » 15.88 15.88 1.20 6.35 6.35
    SNGG090308LF KCU10 » 9.53 9.53 0.80 - -
    SNGG090308LF KC5010 » 9.53 9.53 0.80 3.18 3.81
    SNGG-LF

  16. SNGG-FS

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    SNGG120408FS KCU10 » 12.70 12.70 0.80 - -
    SNGG090308FS KCU25 » 9.53 9.53 0.80 3.18 3.81
    SNGG090308FS KCU10 » 9.53 9.53 0.80 - -
    SNGG-FS

  17. DNMG-CT

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    DNMG150612CT KCU10 » 12.70 15.50 1.14 - -
    DNMG150612CT KC5010 » 12.70 15.50 1.14 6.35 5.16
    DNMG150608CT KCU10 » 12.70 15.50 0.74 - -
    DNMG150608CT KC5010 » 12.70 15.50 0.74 6.35 5.16
    DNMG150604CT KC5010 » 12.70 15.50 0.34 6.35 5.16
    DNMG150412CT KCU10 » 12.70 15.50 1.20 - -
    DNMG150412CT KC5010 » 12.70 15.50 1.20 4.76 5.16
    DNMG150408CT KCU10 » 12.70 15.50 0.80 - -
    DNMG150408CT KC5010 » 12.70 15.50 0.80 4.76 5.16
    DNMG150404CT KCU10 » 12.70 15.50 0.40 - -
    DNMG150404CT KC5010 » 12.70 15.50 0.40 4.76 5.16
    DNMG110408CT KC5010 » 9.53 11.63 0.80 4.76 3.81
    DNMG110404CT KC5010 » 9.53 11.63 0.40 4.76 3.81
    DNMG-CT

  18. DNMG-FF

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε  
    DNMG150608FF KCU10 » 12.70 15.50 0.80
    DNMG150604FF KCU10 » 12.70 15.50 0.40
    DNMG150408FF KCU10 » 12.70 15.50 0.80
    DNMG150404FF KCU10 » 12.70 15.50 0.40
    DNMG110408FF KCU10 » 9.53 11.63 0.80
    DNMG110404FF KCU10 » 9.53 11.63 0.40
    DNMG-FF

  19. DNGP

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    DNGP150608 KCU10 » 12.70 15.50 0.80 - -
    DNGP150608 KC5010 » 12.70 15.50 0.80 6.35 5.16
    DNGP150604 KCU10 » 12.70 15.50 0.40 - -
    DNGP150604 KC5010 » 12.70 15.50 0.40 6.35 5.16
    DNGP150408 KCU10 » 12.70 15.50 0.80 - -
    DNGP150408 KC5010 » 12.70 15.50 0.80 4.76 5.16
    DNGP150404 KCU10 » 12.70 15.50 0.40 - -
    DNGP150404 KC5010 » 12.70 15.50 0.40 4.76 5.16
    DNGP150402 KCU10 » 12.70 15.50 0.20 - -
    DNGP150402 KC5010 » 12.70 15.50 0.20 4.76 5.16
    DNGP150401 KCU10 » 12.70 15.50 0.10 - -
    DNGP150401 KC5010 » 12.70 15.50 0.10 4.76 5.16
    DNGP

  20. DNGG-FS

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    DNGG150604FS KCU25 » 12.70 15.50 0.40 6.35 5.16
    DNGG150408FS KCU25 » 12.70 15.50 0.80 4.76 5.16
    DNGG150404FS KCU25 » 12.70 15.50 0.40 4.76 5.16
    DNGG150402FS KCU25 » 12.70 15.50 0.20 4.76 5.16
    DNGG110402FS KCU25 » 9.52 11.63 0.20 4.76 3.81
    DNGG-FS

  21. DNGG-LF

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    DNGG150408LF KCU10 » 12.70 15.50 0.80 - -
    DNGG150408LF KC5010 » 12.70 15.50 0.80 4.76 5.16
    DNGG150404LF KCU10 » 12.70 15.50 0.40 - -
    DNGG150404LF KC5010 » 12.70 15.50 0.40 4.76 5.16
    DNGG150402LF KCU10 » 12.70 15.50 0.20 - -
    DNGG150402LF KC5010 » 12.70 15.50 0.20 4.76 5.16
    DNGG-LF

  22. CNMG-FP

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    CNMG120412FP KCU10 » 12.70 12.90 1.20 - -
    CNMG120412FP KC5010 » 12.70 12.90 1.20 4.76 5.16
    CNMG120408FP KCU10 » 12.70 12.90 0.80 - -
    CNMG120408FP KC5010 » 12.70 12.90 0.80 4.76 5.16
    CNMG120404FP KCU10 » 12.70 12.90 0.40 - -
    CNMG120404FP KC5010 » 12.70 12.90 0.40 4.76 5.16
    CNMG-FP

  23. CNMG-CT

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    CNMG120408CT KCU10 » 12.70 12.90 0.80 - -
    CNMG120408CT KC5010 » 12.70 12.90 0.80 4.76 5.16
    CNMG-CT

  24. CNMG-FN

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    CNMG120402FN KCU10 » 12.70 12.90 0.20 - -
    CNMG120402FN KC5010 » 12.70 12.90 0.20 4.76 5.16
    CNMG-FN

  25. CNGP

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε  
    CNGP120408 KCU10 » 12.70 12.90 0.80
    CNGP120404 KCU10 » 12.70 12.90 0.40
    CNGP120402 KCU10 » 12.70 12.90 0.20
    CNGP120401 KCU10 » 12.70 12.90 0.10
    CNGP

  26. CNGG-LF

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    CNGG160612LF KCU10 » 15.88 16.12 1.20 - -
    CNGG160612LF KC5010 » 15.88 16.12 1.20 6.35 6.35
    CNGG160608LF KCU10 » 15.88 16.12 0.80 - -
    CNGG160608LF KC5010 » 15.88 16.12 0.80 6.35 6.35
    CNGG120412LF KCU10 » 12.70 12.90 1.20 - -
    CNGG120412LF KC5010 » 12.70 12.90 1.20 4.76 5.16
    CNGG120408LF KCU10 » 12.70 12.90 0.80 - -
    CNGG120408LF KC5010 » 12.70 12.90 0.80 4.76 5.16
    CNGG120404LF KCU10 » 12.70 12.90 0.40 - -
    CNGG120404LF KC5010 » 12.70 12.90 0.40 4.76 5.16
    CNGG120402LF KCU10 » 12.70 12.90 0.20 - -
    CNGG120402LF KC5010 » 12.70 12.90 0.20 4.76 5.16
    CNGG120401LF KCU10 » 12.70 12.90 0.10 - -
    CNGG120401LF KC5010 » 12.70 12.90 0.10 4.76 5.16
    CNGG-LF

  27. CNGG-FS

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    CNGG120408FS KCU25 » 12.70 12.90 0.80 4.76 5.16
    CNGG120404FS KCU25 » 12.70 12.90 0.40 4.76 5.16
    CNGG120402FS KCU25 » 12.70 12.90 0.20 4.76 5.16
    CNGG-FS

149 Item(s)

per page

Set Ascending Direction
Newsletter
Shop By

Currently Shopping by:

  1. Material Machining: Universal Remove This Item
  2. Insert Type: Negative Remove This Item
  3. Type of Cut: Finishing Remove This Item
Clear All

Shopping Options

Manufacturer
  1. Kennametal (149)
ISO Insert Range
  1. Beyond Premium (149)
Material Machining
  1. Steel (393)
  2. Stainless Steel (178)
  3. Cast Iron (188)
  4. Aluminium (13)
  5. HRSA (205)
Insert Type
  1. Positive (472)
Type of Cut
  1. Fine Finishing (8)
  2. Wiper Finishing (31)
  3. Medium (143)
  4. Rough Positive (17)
  5. Rough (54)
Tip Style
  1. CNGG (17)
  2. CNGP (4)
  3. CNMG (10)
  4. DNGG (11)
  5. DNGP (12)
  6. DNMG (19)
  7. SNGG (7)
  8. SNGP (2)
  9. SNMG (3)
  10. TNGG (6)
  11. TNGP (2)
  12. TNMG (11)
  13. VNGG (12)
  14. VNGP (4)
  15. VNMG (4)
  16. WNGG (8)
  17. WNMG (17)
Radius°
  1. 0.10 (9)
  2. 0.20 (19)
  3. 0.34 (1)
  4. 0.40 (47)
  5. 0.74 (2)
  6. 0.80 (57)
  7. 1.14 (2)
  8. 1.20 (11)
Newsletter
© FG Metcalfe & Son Ltd. All Rights Reserved.   |   Kennametal Distributor | Official SECO Distributor

Please wait...